Plumber in Utah | Professional Plumbing Services

We strongly advise against using liquid chemical drain cleaners. They rely on caustic chemical reactions that generate intense heat. In older homes, this can melt plastic pipes or accelerate corrosion in cast iron and copper lines. Furthermore, they rarely clear the entire blockage. We use professional snaking and hydro-jetting instead.

Gurgling drains indicate that air is trapped in your plumbing system. This is usually the first sign of a developing blockage in your main sewer line or a blocked plumbing vent pipe on your roof. It's a warning sign that sewage may soon back up into your home, so it should be inspected immediately.

Yes! Plumbing disasters don't wait for business hours. We operate a true 24/7 emergency dispatch center. Whether it's a Sunday morning or a holiday night, when you call us, we will route an on-call master plumber to your home immediately.

A traditional tank water heater stores 40-50 gallons of water and constantly uses energy to keep it hot 24/7. A tankless water heater only heats water on demand as it flows through the unit. Tankless units save energy, take up much less space, and provide an endless supply of hot water.

A constantly running toilet is usually caused by a faulty flapper valve, a misadjusted float, or a failing fill valve. While it seems like a minor annoyance, a running toilet can waste hundreds of gallons of water a day, causing a massive spike in your utility bill. We can quickly rebuild the tank components to stop the leak.

First, immediately locate your main water shutoff valve (usually in the basement, garage, or near the street meter) and turn it completely off to stop the flooding. Then, turn off the electricity to the affected area if it is safe to do so. Finally, call our 24/7 emergency dispatch line for immediate repair.

A rotten egg (sulfur) smell is usually caused by anaerobic bacteria reacting with the magnesium or aluminum anode rod inside your water heater. We can flush the tank, sanitize the system, and replace the standard anode rod with a zinc-aluminum rod, which typically eliminates the odor permanently.