Plumber in South Dakota | Professional Plumbing Services

Yes! Plumbing disasters don't wait for business hours. We operate a true 24/7 emergency dispatch center. Whether it's a Sunday morning or a holiday night, when you call us, we will route an on-call master plumber to your home immediately.

A rotten egg (sulfur) smell is usually caused by anaerobic bacteria reacting with the magnesium or aluminum anode rod inside your water heater. We can flush the tank, sanitize the system, and replace the standard anode rod with a zinc-aluminum rod, which typically eliminates the odor permanently.

A constantly running toilet is usually caused by a faulty flapper valve, a misadjusted float, or a failing fill valve. While it seems like a minor annoyance, a running toilet can waste hundreds of gallons of water a day, causing a massive spike in your utility bill. We can quickly rebuild the tank components to stop the leak.

A standard tank water heater typically lasts between 8 and 12 years, depending on the hardness of your water and whether you perform annual maintenance (like flushing the tank and replacing the anode rod). If your tank is over a decade old and needs a major repair, replacement is usually the most cost-effective option.

Signs of a hidden leak include an unexplained spike in your water bill, the sound of running water when all fixtures are off, damp or warm spots on your floors, or a continuously spinning dial on your water meter. We use advanced acoustic listening devices and thermal imaging to find leaks without destroying your walls.

Low water pressure can be caused by a variety of issues, including a failing pressure reducing valve (PRV), hard water scale buildup inside your pipes, or a hidden leak in your main water line. It's best to have a licensed plumber inspect the system to pinpoint the exact cause rather than guessing.

We strongly advise against using liquid chemical drain cleaners. They rely on caustic chemical reactions that generate intense heat. In older homes, this can melt plastic pipes or accelerate corrosion in cast iron and copper lines. Furthermore, they rarely clear the entire blockage. We use professional snaking and hydro-jetting instead.